China Sanliv hand held kitchen side spray showerhead and hand spray hose assembly is a set of kitchen side spray head with hand spray hose. It suitable for Pull-Out Spray Kitchen Faucet.
キッチン シンクの蛇口 sprayer Functions
- Repairing and Replacing a Kitchen Sink Sprayer
- Changing a leaky キッチンシンクスプレーヘッド.
- Replacing a leaky kitchen spray hose.
- Update the Kitchen Sink Spray Hose & Head Assembly.
Replacing Kitchen Side Sprayer Head and Hand Spray Hose
If your sprayer “screams” or whistles when you use it, you probably have a hose problem. You can either buy just a replacement hose or the whole unit, including a new sprayer head. If your sprayer is old, get the whole unit. It will save you time and trouble as the sprayer head is usually already attached.
最初, turn off the water supply to the kitchen sink. You will see little faucets under the sink. One is the hot water supply and one is the cold. Turn both all the way to the right. You will see where the sprayer hose is connected to the plumbing. Disconnect it. 次, look up to the place directly under where the sprayer is located on your sink. There should be a simple nut. Loosen it so you can remove the little sleeve that surrounds the sprayer opening. Take out the old hose. Replace it with the new one by feeding it through the sleeve. In some situations, you might have to disconnect the sprayer head to fit through the sleeve (see instructions above).
Reconnect the sprayer to the plumbing, tighten the nut under the sprayer, and turn the water supply back on. Now test out your new sprayer, you do-it-yourself right!
