Kitchen and Bathroom Faucet manufacturing process: Kitchen Faucet and Bathroom Mixer Taps are used frequently everyday. But the faucet production process or manufacturing process is hardly to know. Sanliv faucet manufacturer guide you to learn more about faucet.
Sanliv Faucet Manufacturing Process
Due to continuous automation, the manufacturing process of faucets have become easier. Productivity and efficiency over the years have increased continuously due to computers involved in production. The basic process involved are forming, finishing and final assembly.
Raw Materials
Messing, an alloy of copper and zinc, is the most widely used material for faucets due to its resistance to soft-water corrosion and hard-water calcification. It usually contains some alloying elements—like bismuth—to make it easier to process. Brass is received as bar stock of 0.13-2 in (0.33-5 cm) in diameter, depending on the size of faucet. The majority of the other components that make up a faucet are made of other metals or ceramics and are received as finished parts from other manufacturers.
Faucet Designs: To meet a variety of consumers’ needs, faucets come in a wide range of styles, Farben, und endet. Ergonomic designs may involve a longer spout length and easier to operate handles. The shape of the faucet and its finish will affect the manufacturing process. Some designs will be more difficult to machine or forge than others. A different finishing process may be used to achieve a different look.
For the homeowner, special finishes are available, including brushed nickel, poliertes Nickel, satin black, Gold, platinum, and a variety of colors. Consumers also now customize the look of the faucet, combining more than one type of finish. Warranties are longer and more features are available. Prices to the consumer ranged in the spring of 2000 von $40 all the way up to $500. The Manufacturing Process
Faucet manufacturing process has become highly automated, with computers controlling most of the machines. Productivity and efficiency have thus improved over the years. The basic process consists of forming the main body of the faucet (some-times including the spout if no swivel is needed), applying a finish, and then assembling the various components, followed by inspection and packaging. The faucet industry has also been impacted by environmental regulations, which have required special processes to be developed.
Forming
There are two methods used to make the faucet bodies. Most manufacturers use a machining process to shape the body into the required size and dimensions. This involves first cutting the bars into short slugs and automatically feeding them into a computerized numerically controlled machining center of multi-spindle and multi-axis design. This machine performs tuming, milling, and drilling operations. It typically takes about one minute to make a part.
Larger faucets may require numerous machining operations. Beispielsweise, LED Light Regenduschen Foto 32 machining operations are required for some kitchen faucet bodies using a rotary machining center. With the proper machine, it can take as little as 14 seconds to make a part. Some parts, such as cast spouts for kitchen faucets, are also machined in a separate operation before assembly.
Some faucet manufacturers use hot forging instead of machining, since this method can produce a near-net shape in about three seconds with little waste. Forging is the process of shaping metals by deforming them in some way. In hot forging, heated metal is forced into a die that is almost the same shape as the faucet body. The pressure is slowly increased over the course of several seconds to make sure the die is completely filled with metal. Only minor machining is required to produce the exact dimensions.
Finishing
After machining, the parts are ready for the finishing process. Those components that come into contact with water may first require a special surface treatment to remove any remaining lead. This involves a leaching process that eliminates lead molecules from the brass surface. The conventional finish is chrome since this material is most resistant against corrosion. First a base coating of electroplated nickel is applied, followed by a thin coating of electroplated chromium. The chrome layer is deposited from a plating bath containing certain additives that improve corrosion resistance.
If brass plating is used, a clear polymer coating is applied to improve durability. For white and other colored finishes, a similar polymer or epoxy plastic with color added is sprayed onto the faucet in an electrically charged environment. Both coatings then are heat cured.
To achieve a polished brass look, physical vapor deposition is used, which applies the metal coating in a vacuum chamber. This chamber has four components: a vacuum pump to provide a controlled environment free of contaminants; a tank that emits several types of gases; a target rod acts as the metal source; and racks to hold the faucet parts. The target is made of a corrosion-resistant material such as zirconium.
An electric arc heats the target to vaporize the material, then strikes the surface of the faucet at high speed and reacts with the mixture of gases. One gas provides the color and another provides the corrosion resistance. As the target material combines with these gases, it adheres to the faucet part, creating a bond that is virtually indestructible. Some manufacturers use a spiral coil around the target to provide a uniform distribution of the coating.
Assembly
After plating, the parts are stored in bins until assembly. Assembly can involve both manual and automated processes. For some faucets, prelubricated rubber seals or o-rings are installed by hand.
Schließlich, the faucets and other components are sent for final assembly. This process takes place on rotary assembly machines, which are precisely controlled, or by robots. The sprout, if separate, is first installed, followed by the ceramic cartridge. This cartridge is screwed in place with a brass using a pneumatic gun, and then the handle is attached by hand. Sometimes the copper tubes are installed before assembly. After assembly, the faucets are packaged in boxes along with any other components that are needed for final installation.
Quality Control
After the first part is machined, it is checked against the blueprints to ensure it matches all dimensions. A go-no-go gauge is used to make sure the interior and exterior threads fit together. Since machining is automated, random samples are then checked for the more critical dimensions. Before plating, parts are visually checked for surface imper-fections, which are removed by sanding. After final assembly, every faucet is pressure tested with air for leaks and tested for durability.
Faucets must also pass several environmental regulations. The National Sanitation Foundation 61 regulation, which limits contaminants in drinking water (lead is lIppb [Teile pro Milliarde] in water from endpoint devices), applies to kitchen faucets, lavatory faucets and drinking water dispensers. Other laws are more strict—California’s Proposition 65 limits the allowable lead to 5 ppb for a consumer faucet. There are also plumbing codes to deal with, which can vary from city to city. Many now require antiscald tub and shower faucets.
Um NSF Zertifizierung von einem Wasserhahn erhalten, Hersteller zunächst eine Liste aller Materialien vorlegen, einschließlich der Formulierung in dem Produkt verwendet. NSF Toxikologen überprüfen Sie dann die Materialformulierungen, um mögliche Verunreinigungen, die aus dem Wasserhahn und in das Trinkwasser extrahieren kann bestimmen,. NSF nimmt dann eine Inspektion der Produktionsanlage und der Materialformulierungen überprüfen, Materiallieferanten, Qualitätskontrollverfahren und Operationen. Produktproben werden nach dem Zufallsprinzip für die Prüfung bei NSF Laboratorien ausgewählt.
Armaturen eine strenge dreiwöchigen Testsequenz durchlaufen, wo sie mit einem in der Norm festgelegten Extraktions Wasser gefüllt. Ausgewählte Wasserproben auf Schadstoffe analysiert. NSF Toxikologen vergleichen die Schadstoffgehalte auf die zulässigen Höchstwerte in ANSI / NSF Standard etabliert 61. Wenn alle Schadstoffgehalte des Produktes die Anforderungen der Norm erfüllen, das Produkt kann zertifiziert werden. Erst dann darf der Hersteller die NSF-Zeichen auf dem Produkt bedeutet NSF-Zertifizierung angezeigt. Um zertifiziert zu werden, einige Hersteller mussten ihre Herstellungsprozess komplett ändern, wie der Wechsel zu einem reineren Messingmaterial oder das Hinzufügen eines Fertig Spülvorgang.
Nebenprodukte / Abfälle
Altmetall aus der Bearbeitung oder Schmiedeprozess wird recycelt. Die Veredelungsprozesse können Abfälle, die entsorgt oder durch Recycling minimiert werden müssen produzieren. Da die Mehrzahl der Prozesse automatisiert, Abfall wird minimiert.
Die Zukunft
Armaturenhersteller wird weiterhin Wert und die Qualität in den Verbraucher zu erfüllen’ steigenden Anforderungen. Die Zahl der Arten und der Bereich der Preise wird erweitert, mit höheren End-Produkte immer beliebter, wie Umbau intensiviert. Europa wird auch weiterhin in der Design-Abteilung vor den Vereinigten Staaten bleiben, mit moderneren Stilen und Farben. Obwohl das allgemeine Herstellungsverfahren wird etwa die gleiche bleiben, mehr Automatisierung verwendet.
Neuartige Oberflächen mittels PVD-Technologie hergestellt werden weiter verbreitet als Verbraucher erkennen, diese Oberflächen können sowohl Stil und Haltbarkeit bieten. Dies kann von den Herstellern, um die Wirtschaftlichkeit des Verfahrens zu verbessern, da es teurer als Verchromung. Die Popularität der Filtration wird Hähne erweitern, weil die Konsumenten die Vorteile der integrierten Filtern realisieren. Schließlich wurden diese Arten von Armaturen werden zur Norm.
Der Trend hin zu batteriebetriebenen elektronischen Armaturen wird voraussichtlich weiter, und mit einer Gesamtpreisverfall, Handelsmärkte sollten erweitern. Technologie wird sich weiter verbessern, so dass diese Armaturen leichter zu reparieren und mit verbesserter Bedienung durch Faseroptik. Mit solchen Verbesserungen in Technik und Preis, die elektronische Wasserhahn wird bald in selbst den Wohnungsmarkt.
Overall, der Sanitär-Branche wird sich weiter konsolidieren und Hersteller müssen daher flexibel bleiben. Das Internet wird auch weiterhin eine Rolle im Markt zu spielen und eines Tages vielleicht sogar Armaturenhersteller verkaufen ihre Produkte online direkt an den Verbraucher.
