Der beste Weg, um einen undichten Einhand-Badhahn zu reparieren

Unter bad-kitchen-faucets.com finden Sie den besten Weg, um einen undichten Badhandgriff mit einem Griff zu reparieren. Erfahren Sie jetzt, wie Sie Ihren Einhand-Badarmatur Schritt für Schritt reparieren. Wenn Ihr Wasserhahn in diesem Artikel nicht vom selben Typ ist, Bitte fragen Sie die Fachleute.

Normalerweise müssen Sie den Wasserhahngriff entfernen, um zu den abgenutzten Gummiringen zu gelangen, die den Tropfen ursprünglich ausgelöst haben. First attempt spraying the screw with WD40 oil every day for a week. Then try loosening the screw again to check if it’ll come loose or not. If this doesn’t do the trick, or if you finally strip the head of the screw, next you will have to try to drill out the Allen screw. To do this use a drill bit about the same size as or slightly less than the screw and work gently or you’ll break the faucet handle and have to replace it, but it’s well worth the try it if you can save the faucet valve inside. As a last resort, you can just unwind the cap with the faucet handle still connected.

– If the screw is still not moving, or if you strip it so it won’t come out, then actually unwind the cap with the faucet handle still in place. You can’t grasp the flat edges with the faucet still on. Stattdessen, buffer the plier jaws and grip the round edge below.

– This is challenging, because one cannot easily grab the flat edge of the cap, with the edge that’s like the pliers. Make sure that you buffer the jaws carefully when you grip the smooth, rounded body of the cap. It is best to use rubber tape, because then youwon’t squeeze the cap too hard. Gently Move the cap counter clockwise to remove it. The assembly that you remove will now contain the handle, cap, cam, packing and ball.

– The following task is to release the ball from its stem. The screw holds onto the stem. Try grabbing it with the pliers and twisting it slowly. The goal is to pull apart the parts so that you can salvage and use the cap over . You’ll still need to buy a new handle and a faucet repair kit that will include a new ball.

– If this doesn’t work, the only solution is to change out the entire faucet. Don’t get discouraged, this is a challenging fix.