New Kitchen Faucet and Bathroom Fixtures » Bath tub faucet

How to Repair or Replace a Leaky Bathtub Faucet

Sanliv — Sat, 16 Jan 2010 13:45:30 +0000

How to Repair and Replace Bathtub Faucets to Beautify Your Bathroom? Fix a Leaking bath tub Faucet is a easy work. Learn more about Bathtub Faucet Handle replacement from this article.

There are a wide variety of bathtub faucets available in today’s marketplace. Technology and design innovations over the last few years have brought about a whole new way of looking at the bathtub and its fixtures. Once upon a time, bathtub faucets were purely functional—bathing was viewed as a necessity. Nowadays, our spa-like bathrooms have become inspiring retreats, and the bathtub is the main attraction!

Gorgeous deep claw foot tubs and garden tubs are designed to enhance our soak, just as complementary bathtub faucets are designed to add the finishing touch. So replacing those old rusted, leaky, or outdated fixtures with polished chrome, Tuscan bronze, satin nickel, stainless steel, or pewter finished faucets will make the dullest bathroom shine.

We’ve had a leaking bathtub faucet for awhile and never realized just how much water we were wasting until we placed a canister underneath which filled up overnight. Our dog had gotten used to water always being in the tub and now considers it an alternate source of water beyond her bowl. At this point we realized we had to do something about it.

First make sure to shut off your water, both your main line and your water heater line. Our main line shut-off is located in our front yard near the wall and the water heater shut off is located at the water heater.

The process of removing the faucet handle is straightforward. Open the faucet a but to relieve the pressure then use a screwdriver to pop-off the end cap which gives you access to a screw that holds the faucet handles in place. Remove that screw and the faucet handles should pull off nice and easy.

You’ll then notice a fitting that secures the handle in place and this can be removed with a wrench. Behind that fitting is a second fitting that secures the faucet stem and this also needs to be removed to see where and why the leak is occurring. Removing the faucet stem can take a bit more force and many times a faucet remover is needed.

When we removed our stem we noticed the seat came out with it!!! Our faucets were so old and the leak so bad that over years of cranking on the handles to turn the water off it had forced the threads in the seats to break and the seat had firmly implanted itself to the shaft and washer! So the water was never being sealed off thus the constant leak.

Unfortunately this required a replacing the pipes since the threads were bare and this work was beyond our technical abilities so we called in the plumber.

But if all had gone normal we would have just replaced the seals which were pitted and worn then put the handles back on which should have fixed the leak. But in the course of home improvement you never know what curveballs you’ll be thrown, it’s just a matter of knowing when to swing and when to walk.

Bathtub Faucet Repair and Cartridge Replacement

Sanliv — Fri, 01 Jan 2010 07:14:15 +0000

Bath Tub Faucet Features, Bathtub Faucets Style, Bathtub Faucet Cartridge and Bathtub Faucet Repair. Choosing bathtub faucets can be as simple as picking the right faucet cartridge. Get exciting bath faucet features and style at a reasonable price.

Start by looking at a bunch of bath tub faucets and listing all the features you can find. Then picture in your mind the exact tub faucet look you would like. Finally, list specifically the features you’d like your bath faucet to have. Then compare your mental picture and chosen faucet features to what is available, and find a match.

Bath Tub Faucet Features

There are many higher-grade features you may find worthwhile. Did you know you can get a pressure-balanced faucet with thermostatic valve? In other words, no matter how many toilets get flushed or dishwashers turned on while you’re in the shower or bath, your water flow is steady and never goes ice cold or burning hot. Or maybe you’d like to know your tub faucet will always be beautiful. You can now get tub faucets with designer finishes plus a lifetime warrantee that they’ll never tarnish or corrode or flake off. And finally, many high-end bathtub faucets have their own valve system. So if you ever just feel like changing the style, you can replace your bathroom faucets without having to do anything with the plumbing. That means fast, simple installation, which every homeowner can appreciate

Bathtub Faucets Style

You want a bath faucet that looks terrific, and that is also built to last a long time. You have a wide range of styles to choose from. Maybe you want a contemporary chrome bathtub faucet that makes a bold statement to visitors. Or maybe you want to create the comfy, rustic, cast iron farmhouse effect. Or maybe it’s that upscale brushed nickel antique look that excites you. If you can describe it, you can search and find it online, find out which manufacturers make it, and how their prices compare. You can even search for reviews of particular bath tub faucets models to see what actual buyers think of the configuration.

Bathtub Faucet Cartridge

The best quality bathtub faucets you’ll find – and the easiest installation, too – probably means a single-piece faucet with a washerless cartridge. This type of tub faucet has no washers and no springs, greatly reducing the chance of leaks. The cartridge itself has minimal parts, which translates to greater durability and reliability, probably for many years. A ceramic disc cartridge will best withstand heavy and variable water pressure. And many of these bathtub faucet cartridges come with a lifetime warranty, so if you ever have a leak or corrosion problem, you can replace it at no cost.

Bathtub Faucet Repair

What could possibly be more annoying and distracting than a leaky bathtub faucet? And depending on the type of leak, you may have a legitimate concern that there is a leak in the pipes behind the walls, which could lead to a more costly structural repair or even a health-threatening growth of mold. So it’s important to spot a problem and take care of it quickly. The tub faucet itself may have a scratched or torn cartridge, damaged o-ring, or a grommet may have gone bad. Before you call a plumber, your first and cheapest step is to replace the cartridge and see if that corrects your problem.

Where to buy bathtub faucet?

Sanliv Sanitary Ware is a professional faucet manufacturer and exporter in China. Sanliv bathtub faucets feature high quality, various designs and commercial prices. Welcome to visit www.sanliv.com/

Wall Mount Faucet-Contemporary Bathroom Design

Sanliv — Fri, 30 Oct 2009 06:43:50 +0000

Clean and Contemporary Bathroom Design with Sanliv Wall Mount Faucet – Find more wall mount faucet for bathroom sinks, bathroom shower and bath from Sanliv Faucet Collections.

Are you looking for a unique faucet for your contemporary bathroom design? Why not incorporate the ultimate in modern faucet design into your home’s bath by installing wall mount Icon water faucets by Sanliv in your beautiful and functional contemporary bathroom design? These stunning faucets are designed to coordinate perfectly with a modern vessel sink, such as the clear variety pictured here.

What better way to bring the clean lines of contemporary design elements into your bath than with the perfect pairing of a Sanliv wall mount faucet set and a lovely and modern vessel sink. According to Beth Allison, Sanliv wholesale group product manager, “The popularity of vessel sinks continues to grow. Offering wall-mount faucets to complement these sinks provides style-savvy builders and consumers a new option to bring luxury and style to their homes.”

The sleek and modern design of Sanliv wall mount faucet is a stunning addition to any contemporary bathroom design theme. The fixture’s clean geometric lines are the perfect match for other contemporary fixtures and accessories. The refined spout and stunning levers lend a touch of elegance any bathroom. You’ll also enjoy the sight of clean and clear natural stream of water produced by the faucet, which becomes an extension of the fixtures design as it echoes the look of the faucet.

You can either chrome or brushed nickel finishes, making it easy to coordinate your Icon wall mount faucet with the other accessories used in your overall bathroom design. As with all Sanliv Faucets, your Icon wall mount fixtures are protected by the companies limited lifetime warranty. For more information, see www.Sanliv.com.

Repair A Leaky Bathtub Faucet

Sanliv — Sat, 22 Aug 2009 13:12:00 +0000

Tips To Buy When You Have A Leaky Bathtub Faucet

When you have to fix a leaky bathtub faucet you should look at all the different options you have. You can either do it yourself or you can get someone else to do it for you. You can also do away with the leaky bathtub faucet altogether and purchase a new one. Here are some tips when buying a bathtub faucet.

The first thing to take into account when you purchase a faucet for your bathtub, is to see how large it must be. You should also look at the positioning of the faucets to make sure that the ones you want will work properly. You must also think practically about how you will relax in your bath. There is no point in getting a large fancy faucet when it will get in the way of you lying in the bath.

Another thing you must consider when you buy a faucet is that you will need someone to install it for you. Plumbers are qualified to do this correctly and will ensure that you have no leaks, or problems later on. When you are looking for a plumber you should take care that you are getting someone reliable and good at his job.

The best way to find a reputable plumber is to look in the yellow pages or your local newspapers. You can also approach a rental agency and enquire about who they use. You can use this plumber who has credible references. You might want to contact your plumber before you buy any new faucets. He will also be able to help you choose something that will work for your bathroom.

The next thing when you are buying a faucet is to think about what functions you need it to perform. Do you want to have a shower in the bathtub that you will need to have a special faucet for? This will make a difference as to the type of bathtub faucet you buy.

Bathtub Faucet Repair & Replacement

Sanliv — Sat, 22 Aug 2009 13:02:44 +0000

Bathtub Faucet Repair & Bath Tub Faucet Replacement is a professional work for plumbers. But you may know how to Repair a Leaking Tub Faucet by yourself. Fixing a bathtub faucet is very similar to repairing a sink faucet.

Imagine a homeowner soaked completely in a bathroom remodel project. What do you think feature high on his list of priorities? Apart from addressing routine problems like clearing clogged drainage, he is sure to focus on infusing both style and substance into this stolid part of his home.

So he makes an earnest effort to remove all traces of quotidian drabness from the floor of the space, replacing it with a more eye-catching pattern and sending the glam quotient soaring in the bargain.

Installing a stunning new shower faucet bearing the signature stamp of hallowed manufacturers like Moen, Delta or Pegasus manages to burnish the aura of the brass handles of the spout faucet fixed on the sink. Plumbing contractors are summoned urgently with a boatload of supplies to lift the specters of other leaking fixtures like water heaters valves.

“Mission accomplished”, exults the owner, little realizing that he has sequestered one very important aspect to the corner. Can one discount the colossal impact of that good old Roman bathtub faucet?

It is sad, but most homeowners turn a blind eye to not only routine bathtub pipes and tub faucet repair, but also become utterly tone deaf when the contentious issue of trying to replace bathtub faucets is broached.

Despite being used several times a day, I am completely bemused at the nonchalance that how to replace bathtub faucets elicits.

It’s More Than Faucet Repair

Bathtub faucet repair forms just one miniscule part of the intricate world of tub faucets. There are several styles and designs with which these fixtures manage to impress the connoisseur in you.

If all things ancient fascinate you, then tub faucets with separate handles for hot and cold water are sure to take you on a trip down memory lane. There are however, several hi-end faucets that touch new levels of functional exuberance and finesse that are certain to make you completely delirious with joy. These new-age single-handle faucets are fitted with cartridges, in place of those primitive washers, that drench you with a decadent mix of both hot and cold water.

In addition, there are also Roman tub faucets and the more regular ones that tend to jut out of the wall above the bathtub. You may have some trouble trying to decide between the two, but there are no binary perceptions about the fact that you must invest in a fixture that boasts of exceptional quality. It may drain of your finances, but the investment will definitely be worth it.

What’s The One In Your Bathroom?

Before you actually get down to the business of replacing that bathtub faucet, it’s important to familiarize oneself with the structure and composition of each. You can have either a two-handle compression faucet or a single-handle washerless faucet. Either way, you will have to address the issue of a worn-out cartridge in order to bring about some semblance of order in your bathroom and life.

Who Needs A Plumbing Professional?

It may sound completely absurd, but the fact remains that a leaking, worn-out faucet can be replaced for less than $100. That startling figure includes the cost of special tools and replacement parts available at Home Improvement Centers. The best part is that this job does not call for any kind of previous experience.

There are also several kinds of problems that plague bathtub faucets. While some homeowners may have to deal with certain degree of corrosion on the spout that ruins its finish, many have to contend with a damaged diverter or even cracks between the piping and faucet spout that results in constant leaks inside the wall.

A cursory glance under the spout will tell you what kind of bathtub faucet it is – if you find a screw, then it is a slip-on spout, or else it is a screw-on type.

Get Your Tools Ready

Here’s what you will require in your fight against the recalcitrant faucet:

A Philips or flathead screwdriver, depending on the faucet
Pipe thread seal tape or pipe joint compound.
Caulk gun and caulk.
A slip-on type of spout will also require a hex wrench

It’s Time To Launch A Full-On Attack

Here is what you need to follow in order to put an end to this niggling problem:

Before you begin tinkering with the faucet, make sure you cut-off the water supply to the bathroom.
Turning the pipe counterclockwise, remove this part completely. A slip-on spout will require the assistance of a screwdriver to take off the screw that keeps the faucet in place. Once the screw is off, separate the spout from the copper pipe cautiously.
Loosen the screw on the new spout, then slide it on and tighten the screw, in case you have a slip-on spout. A screw-on spout will require you to determine the kind of pipe that is installed. While a copper pipe calls for the installation of a new spout by cutting-off the thread, in case of a steel one, you will have to discard the old pipe for a brand new one.
Screw the new faucet on by turning it clockwise.
Apply caulk between the new bathtub faucet and the shower wall. Allow the caulk to dry for 24 hours before you enjoy your brand-new faucet.

Now, it’s time to let unbridled joy to take over.

Essential Tub Faucet Parts

Sanliv — Sat, 15 Aug 2009 07:37:53 +0000

Essential Tub Faucet Parts – Having knowledge of different tub faucet parts will help you better diagnose problems and even foresee any before they happen.

Different Types of Tub Faucets
Not all tub faucets are made the same. There are four basic types of tub faucets. These are;

• Compression Faucets
• Disc Faucets
• Cartridge Faucets
• Ball-type Faucets

Each different style has the same basic function, but they do have different tub faucet parts.

Compression Tub Faucet Parts
This type has two separate handles to regulate the flow and temperature of the water. It works on the principle of rubber washers that are compressed, and either cut off the flow of water or increase it.

Disc Tub Faucet Parts
This type of faucet has one handle with two ceramic discs inside the tube assembly. When the handle is lifted, the discs move across each other, allowing holes to line up to regulate water flow. If there is a problem, it is usually because one of these discs is leaking.

Cartridge Tub Faucet Parts
This type has a movable plastic cartridge that moves up and down the handle to line up holes to regulate the water. These can be either single or double handled, and they are easily fixed because you just have to drop in a new cartridge.

Ball-Type Faucet Parts
This type gets its name from the stainless steel ball in the handle, the part that is moved to mix the hot and cold water in order to get the right temperature and water flow.

Bath Faucet Parts, Faucet Handle and More

Sanliv — Mon, 03 Aug 2009 10:18:53 +0000

A basic introduction to the types of bath faucets, bath faucet parts, faucet handles and common problems will prepare you for the task.

Changing bath faucets is a simple repair that can make a big impact. In most cases, you can make the update yourself without a plumber or handyman. However, you should understand the basics of bath faucets beforehand so that you know what you are getting into when you decide to make a replacement. The good news is there is not much to know. A basic introduction to the types of faucets, parts of a faucet and common problems will prepare you for the task.

Types of Sanliv Bath Faucets

There are two primary types of bath faucets: single handle and double handle. Single handle faucets are part of a modern trend. These are the faucets where the hot and cold water is controlled by one handle. Double handle faucets have a separate hot and cold handle. Often, there is a third handle in the middle that switches the water from the tub to the shower.

You will likely want to replace your faucet with the same type. Take your fixture to your local hardware store to ensure that you are purchasing a faucet that works in place of your existing fixture. If you are changing from single to double or double to single, hiring a plumber will probably be necessary.

Parts of Sanliv Bath Faucets

The names of bath faucets parts can be confusing. However, in order to replace these parts, you need to have some basic knowledge about them.

The faucet handles are the parts you hold to turn on the hot water, cold water and switch from tub to shower. If you have a single-handle bath faucet, you only have one of these.

Faucet handles can be removed by popping off the face plate of each and unscrewing the screw below. If you do this, you will see a few other parts.

Behind the hot and cold water, you should see a screw in the pipe which controls the shut off. Behind the shower faucet valve, you will see what is called the cartridge. The cartridge connects the faucet to the plumbing behind. The cartridge is usually attached to the plumbing by a nut or a clip.

On the cartridge there is also an O-ring, which seals the connection to the plumbing. It is also possible that your faucet has an escutcheon, which is a fancy word for a face plate. This can be removed simply by pulling it off once the handle in front of it has been removed.

Common Problems with Sanliv Bath Faucets

The most common problem with a bath faucet is a leak. A likely cause of any leak is a worn down O-ring. You can find O-ring replacements at your local hardware store. You may, in some cases, have to replace the entire cartridge.

If your water does not turn off all the way, a replacement cartridge may also do the trick. Cartridges are available at a hardware store as well. Certain bath faucet finishes have a tendency to attract more dirt and mildew than others. Proper cleaning methods for your bath faucet should be used at all times.

Coatings on bath faucets may make the necessary process unique. For example, a bronze faucet will require different cleaning techniques than a bronze faucet with a coating. It is a good idea to keep the papers and manuals that come with your new faucet. They will guide you in both cleaning and replacement of parts in the future.

Concealed Bathroom Shower Faucet-61830

Sanliv — Thu, 04 Sep 2008 08:01:21 +0000

Traditional Chrome/Polished Brass Shower Faucet by Sanliv. Single Handle Concealed Bathroom Shower Faucet Includes Following Parts:
1. Metal Lever Handle, Also Available In Tub/Shower Model;
2. Posi-Temp Pressure Balancing Valve Cartridge.

This single handle shower faucet offers a dependable, classic design to create a flawless look in any bathroom. Available in an array of stylish finishes, this piece blends well with many types of bathroom dÃ©cor.

Sanliv Bathroom shower faucets are offered in a compelling range of styles, colors and materials to accommodate individual aesthetics and tastes in decor. These can come in single lever, pullout spray, high arch, offset handles, and so on.

Shower faucets should be chosen to complement the architectural theme presented by the cabinetry and appliances of the bathroom. Some concealed shower faucets are reminiscent of an old-fashioned pump, while others appear to be an example of modern sculpture. Likewise, shower faucets should fit into the overall color scheme.

Sanliv Brass Shower Faucets Available Finishes:
Chrome plating
Polished Brass
Platinum / Chrome
Chrome / Gold
Brushed Nickel

Concealed bath mixer-61840

Sanliv — Thu, 04 Sep 2008 23:27:59 +0000

Spesification:Concealed Bath shower faucet

Products description:

Bathtub mixer-61703

Sanliv — Thu, 04 Sep 2008 06:51:31 +0000

Spesification:

Products description:

MATERIALCopper